5052 Aluminum Sheet

5052 Aluminum Sheet in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability.

• Alloy5052
• TemperO / H22 / H24 / H26 / H28 / H32 / H34 / H36 / H38
• Thickness0.15-600mm

Marine 5052 Aluminum Plate

The 5052 aluminum plate is part of the 5000 series, which is primarily alloyed with magnesium. This composition provides a good balance of strength and resistance to corrosion.

• Alloy5052
• TemperF / O / H12 / H14 / H16 / H18 / H19 / H22 / H24 / H26 / H28 / H32 / H34 / H36 / H38 / H111 / H112 / H114
• Thickness0.15-600mm

5052 Aluminum Coil

The 5052 aluminum coil is an alloy made up of 2.5 percent magnesium and 0.25 percent chromium. It’s considered to have great workability and weldability.

• Alloy5052
• TemperO / H12 / H14 / H16 / H18 / H19 / H22 / H24 / H26 / H28 / H32 / H34 / H36 / H38 / H111
• Thickness0.1-3.0mm

Aluminium Slit Coil

Aluminum sheet are widely used for aluminum and plastic composite board, aluminum and plastic pipe, and bottle / tank cap, ceiling board / special-shaped ceiling board,aluminium sheets for cable channel, conmestic packging and electrical manufacture, etc.

• Alloy1100, 1050, 1070, 3003, 3004, 3105, 3005, 5005, 5052, 5754
• TemperO / H24 / H18 / H111 / H14
• Thickness0.3-3mm

Polyester / PVDF Prepainted Aluminum Coil

PVDF coated aluminum coils are specially processed through the technics of roller coating and baking with precise paints from BECKER INDUSTRIAL COATINGS in Sweden and THE VALSPAR CORPORATION in USA.

• Alloy1100, 1050, 1070, 3003, 3004, 3105, 3005, 5005, 5052, 5754
• TemperO~H112
• Thickness0.06mm~1.0mm

Anodized Aluminum Coil

Anodized aluminum coil Primary Competitive Advantages: Experienced Technical Staff , Guarantee / Warranty, International Approvals , Facotry price

• Alloy1050, 1060, 1070, 1100, 1235, 3003, 3004, 3015, 3005, 3105, 5005, 5052, 5757, 5083
• TemperH12 / H14 / H16 / H18 / H22 / H24 / H26 / H28 / H32 / H34 / H36 / H38 / O / F / H111 / H112
• Thickness1-3mm

5000 Aluminum Sheet

5000 series aluminum sheet provided by Haomei Al. includes 5005, 5052, 5754, 5083 series, etc. The 5052, 5005, 5083 and 5A05 series are representative series.

• Alloy5005, 5052, 5083, 5454, 5754, 5A05
• Temper(O-H116) (T2-T6)
• Thickness0.15-2.0mm

5000 Series Aluminum Plate

This major series of this series aluminum plate provided by Haomei includes 5005, 5052, 5754, 5083 series.

• Alloy5083, 5052, 5086, 5454, 5005, 5754
• TemperO, H12, H22, H32, H14, H24, H34, H16, H26, H36, H18, H28, H38, H19, H25, H27,H111, H112,H241, H332
• Thickness2-25mm

5000 5-bar Aluminum Tread Plate

The main ingredient of this series aluminum tread plate is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.

• Alloy5005, 5052, 5754, 5083
• TemperO / H14 / H18 / H19 / H22 / H24 / H26
• Thickness1.0-8.0mm

5000 Coated Aluminum Coil

This series coated aluminum coil provided by Haomei includes 5005, 5052, 5754 series, etc. The 5052, 5005, 5083 and 5A05 series are representative series.

• Alloy5005, 5052, 5754, 5083, 5A05
• TemperO / H14 / H18 / H19 / H22 / H24 / H26
• Thickness0.3-3mm

Embossed Aluminum Sheet, Aluminum Coil

we also supply aluminium slit coil, aluminum plate, aluminum coil, aluminum sheet, aluminum strip, 5 bar aluminum tread plate, anodising aluminum sheet, etc.

• Alloy1050, 1060, 1100, 3003, 5005, 5052, 5083, 3105,3005
• TemperO / H12 / H14 / H16 / H18 / H22 / H24 / H26
• Thickness0.5-3mm

5000 Aluminum Strip

This series aluminum strip provided by Haomei includes 5005, 5052,5083 and 5754 series.

• Alloy5052, 5083, 5154, 5754
• TemperO~H112
• Thickness0.3-10.0mm

embossed aluminum plate for stairs

Application of Embossed Aluminum Panels in Stairs: As a material, aluminum also has an optimal strength-to-weight ratio, which means that façade systems made of aluminum can be smaller than steel.

Aluminium Foil For Packaging

Aluminum foil is a packaging material that has not yet been replaced. It has many advantages such as non-toxicity, thermal conductivity, shading, moisture barrier, fragrance preservation, etc.

Aluminum sheet for construction

The aluminum plates used in construction include single-layer aluminum plates, composite aluminum plates, curtain wall plates and other materials.

Aluminum Coils For Water -based Can End Stock

Aluminum Coils

Aluminum Sheet For Autobody

5052-O aluminum sheet, 5182-O aluminum sheet, 5754-O aluminum sheet, 6016-T4 aluminum sheet

Aluminum coil Mill Finish 5052 5005 H16 H14

Aluminum Coil Mill Finish 5052 / 5005 H16 H14: Where "Uncoated" Becomes a Performance SurfaceMill finish aluminum coil often gets described as "raw" or "unfinished," but that framing misses its real value.

5005 5052 5083 5754 H321 H111 Aluminium Alloy Plate for Marine

5005 5052 5083 5754 H321 H111 Aluminium Alloy Plate for Marine: A Practical "Saltwater Tool" in Sheet FormIn marine engineering, the material choice is rarely about a single headline property.

5052 h19 aluminum coil

5052 H19 aluminum coil is a high-strength, non-heat-treatable aluminum-magnesium alloy coil widely used in industries that require a combination of light weight, corrosion resistance, formability, and improved hardness.

5052 5005 5083 5086 h12 color coated aluminum coil for gutter

When it comes to gutters, choosing the right material can make all the difference between a hassle-free roof and a constant headache. That's where color coated aluminum coils like 5052, 5005, 5083, and 5086 alloys step into the spotlight.

Plain Aluminium Sheet Metal 1100 3003 1050 1060 8011 5052

Fascinating world of plain aluminum sheet metals like 1100, 3003, 1050, 1060, 8011, and 5052. Learn about their unique characteristics, practical uses, and how they become everyday heroes in various industries, all in a friendly and approachable style!

Anodized aluminum sheet Mill Finish 1050 1100 3003 5052

Versatility and durability of anodized aluminum sheets, specifically Mill Finish variants like 1050, 1100, 3003, and 5052. Explore their features and diverse applications in various industries.

5052 Aluminum Coil Jumbo Roll Sheet

There is a quiet kind of strength in 5052 aluminum coil jumbo roll sheet. It does not announce itself with the prestige of aerospace alloys or the hardness of high-strength structural plate.

1100 3003 3105 3104 5052 5005 Prepainted Aluminium Sheet

Explore the versatile features and diverse applications of prepainted aluminum sheets, specifically the 1100, 3003, 3105, 3104, 5052, and 5005 series. Understand how these lightweight materials challenge traditional options in modern manufacturing and inn

Aluminum sheet 1100 1060 3003 5052 H24 H32

Aluminum sheets have become a staple in various industries due to their lightweight, corrosion-resistant properties and versatility. With a variety of grades available, including aluminum sheet 1100, 1060, 3003, and 5052, understanding the specific charac

3A21 5005 5052 5083 2mm 2.5mm aluminum sheet

How 2mm and 2.5mm aluminum sheets made from alloys 3A21, 5005, 5052, and 5083 offer exceptional features and diverse applications, underscoring the distinctive benefits provided by these materials in various industries.

5052 H32 Aluminum Sheet Plate for Boat Construction

Benefits of using 5052 H32 aluminum sheet plate for boat construction. Learn about its features, applications, and why it's the ideal choice for durable, lightweight marine vessels.

6061 6063 5005 5052 Jumbo Coil Aluminum Roll Coil

When considering aluminum alloys for projects that range across industries from construction to automotive and beyond, the Jumbo Coil is a remarkable option. Specifically, the 6061, 6063, 5005.