Alloy 5052 Color coated aluminum coil
Alloy 5052 color coated aluminum coil combines the natural durability of a marine-grade Al-Mg alloy with a high-performance organic coating system. The result is a lightweight, corrosion-resistant, and visually consistent coil product designed for long service life in architectural, transportation, appliance, and general fabrication markets. With excellent formability and strong resistance to salt spray and industrial atmospheres, 5052 is a preferred choice when both appearance and environmental durability matter.
Color coated 5052 aluminum coil is typically supplied as prepainted coil (coil coating line), enabling high-efficiency downstream processing such as roll forming, stamping, bending, and profiling-while maintaining a uniform finish and controlled gloss.
Base metal: Aluminum alloy 5052 (Al-Mg)
Typical tempers: H32, H34 (common for coil coating), also H24/H26 by request
Coating systems: PE, SMP, PVDF, PU (selection depends on exposure and service life targets)
Finish options: Solid colors, metallic, matte, textured, woodgrain transfer, custom RAL/Pantone matching
Color coated coil is generally offered as a two-side coated product (topcoat + primer on the face side, service coat/back coat on the reverse) or one-side coated where the reverse is mill finish or a thin wash coat.
features customers care about
High corrosion resistance by alloy + coating synergy
5052's magnesium content provides strong inherent corrosion resistance, especially in humid and coastal environments, while the coating adds a barrier against UV, moisture, and contaminants.Excellent formability for coated products
In H32/H34 tempers, 5052 balances strength and bendability, supporting tight radii and complex forming with reduced risk of edge cracking when proper coating and process conditions are used.Stable color, gloss, and surface uniformity
Coil coating delivers consistent film thickness and color control across long runs, improving yield and minimizing appearance-related rejects.Low weight with high strength
Compared with many coated steels, 5052 reduces structure weight while retaining rigidity-useful for mobile equipment, trailers, and panels.Clean processing and fast throughput
Prepainted coil eliminates post-fabrication painting, reducing VOC handling, cycle time, and variability.
Typical applications
| Application segment | Typical products | Why 5052 color coated fits |
|---|---|---|
| Building & construction | Fascia, soffit, wall cladding, rainwater systems, ceiling panels | Corrosion resistance, good flatness, durable finishes |
| Transportation | Trailer side panels, truck bodies, caravan components, interior trim | Lightweight, dent resistance, decorative consistency |
| Appliances & housings | Decorative panels, enclosures, covers | Formability, clean appearance, easy maintenance |
| Signage & display | Panels, boards, profiles | Print/finish compatibility, stable color |
| General fabrication | Cabinets, equipment shrouds, HVAC covers | Reliable bending, broad coating choices |
Chemical composition (Alloy 5052)
Values below reflect common limits used in ASTM/EN practice; certificates can be supplied per order.
| Element | Content (%) |
|---|---|
| Mg | 2.2 – 2.8 |
| Cr | 0.15 – 0.35 |
| Si | ≤ 0.25 |
| Fe | ≤ 0.40 |
| Cu | ≤ 0.10 |
| Mn | ≤ 0.10 |
| Zn | ≤ 0.10 |
| Ti | ≤ 0.10 |
| Al | Balance |
Mechanical properties (typical for coated coil tempers)
Actual properties vary with gauge, processing history, and standards. The table is a practical ordering reference for coil-coating grades.
| Temper | Tensile strength (MPa) | Yield strength (MPa) | Elongation A50 (typ.) | Forming note |
|---|---|---|---|---|
| 5052-H32 | 228 – 276 | ≥ 193 | ~10–14% | Strong all-round choice for roll forming |
| 5052-H34 | 248 – 305 | ≥ 215 | ~8–12% | Higher strength, slightly tighter forming window |
| 5052-H24 | 190 – 240 | ≥ 145 | ~12–18% | Better for deep draw / complex bends |
Coating system options (performance-oriented selection)
Coating choice drives UV durability, chalk resistance, chemical resistance, and warranty potential.
| Coating | Typical topcoat thickness (µm) | UV/weathering | Chemical resistance | Typical use |
|---|---|---|---|---|
| PE (Polyester) | 15 – 25 | Good | Good | Interior, light exterior, cost-optimized projects |
| SMP (Silicone-modified polyester) | 20 – 25 | Very good | Good | Exterior cladding, stronger chalk resistance |
| PVDF (70% PVDF / FEVE class) | 25 – 30 | Excellent | Very good | Premium façade, coastal/high-UV zones |
| PU (Polyurethane) | 25 – 35 | Very good | Excellent | Abrasion-prone parts, industrial environments |
Standard coating build often includes primer under the topcoat to improve adhesion and corrosion resistance. Back coat commonly ranges 5–10 µm depending on end use.
Technical specifications (typical supply range)
Exact availability depends on line capability, coating system, and customer tolerances.
| Item | Typical range / option |
|---|---|
| Alloy | 5052 |
| Temper | H24, H32, H34 (custom available) |
| Thickness (metal) | 0.20 – 3.00 mm |
| Width | 20 – 1600 mm |
| Coil ID | 150 / 300 / 505 mm (common) |
| Coil OD | Up to ~1600 mm (line-dependent) |
| Coating structure | 2-coat-2-bake (standard), 3-coat systems by request |
| Surface finish | Gloss, matte, textured, embossed base, metallic, special effects |
| Protective film | Optional PE film (laser film available for some finishes) |
| Standards | ASTM B209 (substrate), EN 485 (substrate), coating per customer spec |
Performance considerations for quick selection
| Requirement | Recommended setup |
|---|---|
| Coastal or high-UV exterior | 5052-H32 + PVDF (25–30 µm) + robust pretreatment |
| Cost-sensitive exterior | 5052-H32 + SMP (20–25 µm) |
| Interior panels / partitions | 5052-H24/H32 + PE (15–20 µm) |
| Industrial fumes / chemical splash | 5052 + PU or PVDF + thicker build + sealed cut edges |
| Tight bending / profiling | 5052-H24 or H32 + flexible primer/topcoat + bend-test validation |
Cut edges and formed corners are the most critical areas for corrosion initiation in any coated metal. For demanding environments, specifying improved pretreatment, sufficient coating build, and appropriate sealants at joints significantly extends service life.
Quality control and typical tests
| Control item | What it ensures | Common method (examples) |
|---|---|---|
| Color difference ΔE | Batch-to-batch consistency | Spectrophotometer |
| Gloss | Visual uniformity | Gloss meter (60°/85°) |
| Dry film thickness | Barrier performance | Non-destructive gauge |
| Adhesion | Coating bonding after forming | Cross-hatch / T-bend |
| Flexibility | Crack resistance on bends | T-bend or mandrel bend |
| Corrosion resistance | Durability in harsh exposure | Salt spray, humidity tests |
For customer-critical parts, sampling can include tensile testing, pencil hardness, MEK rub, and impact resistance depending on the coating family.
Ordering guide (what to specify)
To receive a coil that runs smoothly on your line and meets appearance expectations, provide the following in your inquiry or PO:
| Parameter | Typical choices |
|---|---|
| Alloy & temper | 5052-H32 (most common), H34 for extra stiffness, H24 for deeper forming |
| Substrate thickness & width | Based on final stiffness and forming design |
| Coating system | PE / SMP / PVDF / PU with required service environment |
| Color standard | RAL/Pantone/sample panel approval |
| Gloss level | Matte / semi-gloss / high gloss |
| Coating thickness | Face + back requirements |
| Film | With/without protective film; film type for laser cutting if needed |
| Application | Exterior/interior, coastal/industrial, forming method |
Alloy 5052 color coated aluminum coil is a high-performance prepainted aluminum solution combining marine-grade corrosion resistance with durable, decorative coatings such as PE, SMP, PVDF, or PU. Supplied in practical tempers like H32 and H34, it offers excellent formability, stable color, and lightweight strength for architectural cladding, transportation panels, appliances, signage, and fabricated enclosures. With customizable thickness, width, gloss, and coating build, 5052 prepainted aluminum coil delivers fast processing, consistent surface quality, and long-term outdoor durability-especially in humid, coastal, and industrial environments.
https://www.al-alloy.com/a/alloy-5052-color-coated-aluminum-coil.html
