0.7mm 0.8mm 1060 H14 Aluminum Coil
The 0.7mm 0.8mm 1060 H14 aluminum coil is a practical, high-purity aluminum product designed for customers who want excellent formability, stable surface quality, and reliable corrosion resistance in a thin-gauge format. Based on the 1060 alloy (≈99.6% Al minimum) and supplied in the H14 temper (half-hard), this coil balances workability and strength, making it a favorite for general fabrication, building accessories, insulation jacketing, lighting reflectors, sign materials, and appliance components.
Thin gauges like 0.7 mm and 0.8 mm are especially popular because they process efficiently in coil-fed lines, shear cleanly, and bend consistently-while still providing enough stiffness for housings, cladding, and formed profiles.
What 1060 H14 Means (in Customer Terms)
1060 belongs to the 1xxx series of commercially pure aluminum. Its value is straightforward: it delivers excellent corrosion resistance, high electrical and thermal conductivity, and very good surface finishing behavior.
H14 indicates the coil has been strain hardened to half-hard strength. Compared with fully soft temper (O), H14 provides higher tensile strength and better dent resistance, while remaining highly formable for common bending, roll forming, and stamping operations.
Features That Matter in Real Production
| Feature | What You Get | Why It Helps |
|---|---|---|
| High aluminum purity | Bright appearance, consistent properties | Stable processing and predictable finishing |
| H14 half-hard temper | Better stiffness and handling | Reduced waviness, improved shape retention |
| Excellent corrosion resistance | Long service life in indoor/outdoor use | Lower maintenance for cladding and jacketing |
| Strong surface finishing compatibility | Suitable for anodizing, coating, lamination | Attractive decorative and functional surfaces |
| Thin-gauge efficiency (0.7/0.8mm) | Faster fabrication, lower weight | Cost-effective panels and formed parts |
| High conductivity | Efficient heat/electric transfer | Useful for thermal barriers, reflectors, bus-related cladding |
Chemical Composition (Typical Limits)
1060 is specified mainly by its aluminum purity and controlled impurity limits. Exact limits can vary slightly by standard, but the following table reflects commonly used industry ranges for 1060.
| Element | Composition (wt.%) |
|---|---|
| Aluminum (Al) | ≥ 99.60 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.35 |
| Copper (Cu) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.03 |
| Magnesium (Mg) | ≤ 0.03 |
| Zinc (Zn) | ≤ 0.05 |
| Titanium (Ti) | ≤ 0.03 |
| Others (each) | ≤ 0.03 |
| Others (total) | ≤ 0.10 |
Technical Specifications (Coil Supply Range)
The coil is typically supplied in standard industrial formats, with customization available for high-volume production and special converting lines.
| Item | Typical Supply |
|---|---|
| Alloy / Temper | 1060 H14 |
| Thickness | 0.70 mm, 0.80 mm (other gauges on request) |
| Width | Commonly 100–1600 mm (slit to requirement) |
| Inner Diameter (ID) | 150 / 300 / 505 mm (common coil IDs) |
| Outer Diameter (OD) | Depends on weight and thickness |
| Coil Weight | Commonly 1–5 tons (per customer logistics) |
| Surface Finish | Mill finish, bright finish, coated/laminated options |
| Edge | Mill edge or slit edge |
| Protective Options | Interleaving paper, PE/PVC film, anti-scratch packing |
Mechanical Properties (Typical for 1060 H14)
Mechanical values depend on thickness, processing route, and applicable standard. The following ranges are widely referenced for 1060 in H14 temper and are suitable for quick engineering comparison.
| Property | Typical Range |
|---|---|
| Tensile Strength (Rm) | 95–135 MPa |
| Yield Strength (Rp0.2) | 75–115 MPa |
| Elongation (A50) | 3–10% |
| Brinell Hardness (HB) | ~30–40 |
| Density | 2.70 g/cm³ |
Performance Snapshot: What Users Notice
| Performance Area | Behavior of 0.7/0.8mm 1060 H14 |
|---|---|
| Bending | Works well for common bend radii; tighter bends benefit from proper tooling and grain-direction planning |
| Forming & stamping | Good for light-to-medium forming; H14 reduces "oil canning" compared with fully soft |
| Surface appearance | Clean, bright base; responds well to brushing, coating, and reflective finishing |
| Corrosion resistance | Excellent in atmospheric environments; robust for building and insulation use |
| Joining | Suitable for riveting, adhesive bonding; welding possible with correct practices for pure aluminum |
| Dimensional stability | H14 improves flatness stability during handling and assembly |
Typical Applications (Where 0.7mm / 0.8mm Shines)
Building and Construction Skins
Thin-gauge 1060 H14 is frequently selected for decorative trims, fascia, ceiling panels, flashing-style parts, and lightweight cladding elements. The alloy's corrosion resistance supports long-term use, while H14 temper improves shape retention after bending or roll forming.
Thermal Insulation Jacketing and HVAC Covers
For pipe jacketing, duct wrapping, and insulation protection layers, 0.7 mm and 0.8 mm provide a practical balance of durability and wrap-ability. The material is light enough for quick installation, yet stiff enough to resist handling damage on site.
Lighting, Reflectors, and Optical-Style Components
High-purity aluminum is valued for reflectivity. With the right surface preparation, 1060 can be used for reflective housings, lamp shades, and interior reflective panels, especially where weight and heat transfer matter.
Appliance and General Fabrication Panels
Coil-fed fabrication benefits from consistent temper and thickness. This product is often converted into covers, liners, shields, nameplate backers, and structural skins where extreme strength is not required but a clean surface and easy forming are important.
Signage, Display, and Laminated Panels
1060 is compatible with coating and lamination systems. It is used as a substrate for sign backplates, advertising panels, and decorative sheet products, where surface consistency and corrosion resistance improve finished-product stability.
Electrical and Thermal Utility Uses
While 1060 is not a high-strength conductor alloy, its high conductivity makes it useful for heat-spreading layers, thermal shields, and conductive coverings, especially when paired with other materials in composite assemblies.
Finishing and Processing Options
| Option | Benefit | Common Use |
|---|---|---|
| Anodizing | Improved appearance and surface protection | Decorative trims, panels |
| Color coating (PE/PVDF) | UV/weather resistance and color stability | Exterior cladding, signage |
| Embossing | Added stiffness and visual texture | Jacketing, decorative skins |
| Brushing | Premium visual grain | Appliances, interior panels |
| Film protection | Reduces scratches during forming | High-appearance components |
Why Choose 0.7mm vs 0.8mm?
| Thickness | Best For | Practical Advantage |
|---|---|---|
| 0.7 mm | Lighter skins, tighter forming, cost sensitivity | Lower weight, easier bending |
| 0.8 mm | More stiffness, improved dent resistance | Better "panel feel" and stability |
If your part needs to stay flatter across spans or sees more handling abuse, 0.8 mm tends to feel more robust. If weight and forming ease dominate, 0.7 mm is often the efficient choice.
Quality Focus Points Customers Commonly Specify
| Item | What to Clarify When Ordering |
|---|---|
| Thickness tolerance & flatness | Important for coil-fed punching, panel appearance |
| Surface grade | Reflective, coated, or general mill finish expectations |
| Coil ID/OD & weight | Compatibility with decoiler and press line |
| Edge condition | Slit edge for safe handling and precision converting |
| Packing method | Long-distance shipping, anti-scratch requirements |
| Application environment | Helps match coating/anodizing or protective film needs |
The 0.7mm 0.8mm 1060 H14 aluminum coil is a dependable choice for manufacturers and contractors needing high-purity aluminum performance in a thin, efficient coil form. It brings together excellent corrosion resistance, attractive surface potential, and practical half-hard strength, supporting fast fabrication and clean finished appearance across building, insulation, lighting, appliance, and general sheet-metal applications.
https://www.al-alloy.com/a/07mm-08mm-1060-h14-aluminum-coil.html
